Prof. Chuntai Liu

作者:National Engineering Research Center for Advanced Polymer Processing 时间:2015-12-17 点击数:

Prof. Chuntai Liu

     
 

Present situation

Deputy Director of National Engineering Research Center for Advanced Polymer Processing Technology
Deputy Director of Key Laboratory of Advanced Materials Processing & Mold of Ministry of Education
Zhengzhou University

Academic and Professional Experience

1993.07-Now         Zhengzhou University.
2006.09-2007.07      Department of Chemical & Biomolecular Engineering, Ohio State University, Visiting Scholar.

Education

1983.09-1987.07   Department of Mechanics, Peking University, BS
1990.09-1993.07 Department of Engineering Mechanics, Xi'an Jiaotong University, MS
1999.09-2003.06 School of Material Science and Engineering, Zhengzhou University, PhD

Research interests

Computer aided engineering for polymer processing
Conductive polymer composites
Polymer processing-microstructure-properties
Polymer degradation and stability
Scientific responsibilities

Reviewer for Advances in Polymer Technology, Polymers for Advanced Technologies, Journal of Plastic Film and Sheeting, The Canadian Journal of Chemical Engineering, Composites Part A, e-Polymers, Polymer Engineering & Science, Journal of Engineering Manufacture, Journal of Applied Polymer Science, etc.
Member of the editorial board of Chinese Journal of Applied Mechanics,  Mechanics in Engineering(Chinese),  Die&Mould Industry
(Chinese),etc.
Member of National Technical Committee 33 on Die and Mould of Standardization Administration of China, National Technical Committee
48 on Plastic Products of Standardization Administration of China,etc.

Awards

Second Award of Science and Technology Advances of China(2003)
Second Award of Science and Technology Advances of China(1996)
Award of Gold Prize of Tang Zhaoqian Scholarship at Xi’an Jiaotong University(1993)

Selected Publications(Corresponding authors)
1. Yijing Qin, Yahu Xu, Liying Zhang, Guoqiang Zheng*, Kun Dai, Chuntai Liu*, Xingru Yan, Jiang Guo, Zhanhu Guo*, Shear-induced
interfacial sheath structure in isotactic polypropylene/glass fiber composites, Polymer, 2015, 70: 326-335(IF=3.562)
2. Changyan Zhang , Bo Wang , Jingjing Yang , Daowei Dingc, Xingru Yan, Guoqiang Zheng*, Kun Dai, Chuntai Liu*, Zhanhu Guo*, Synergies
among the self-assembled b-nucleating agent and the sheared isotactic polypropylene matrix, Polymer, 2015,  60:40-49(IF=3.562)
3. Hu Liu, Yilong Li, Kun Dai*,  Guoqiang Zheng, Chuntai Liu*, Changyu Shen, Xingru Yan, Jiang Guo, and Zhanhu Guo*, Electrically
Conductive Thermoplastic Elastomer Nanocomposites at Ultralow Graphene Loading Levels for Strain Sensor Applications, Journal of Materials Chemistry C, DOI: 10.1039/C5TC02751A, (IF=4.696)
4. Haili Zheng, Yabo Quan,  Guoqiang Zheng,*  Kun Dai,  Chuntai Liu* and   Changyu Shen, Fabrication of a polymer/aligned shish-kebab
composite: microstructure and mechanical properties Hide Affiliations, RSC Adv., 2015,5, 60392-60400(IF=3.84)
5. Yilong Li, Hu Liu, Kun Dai*, Guoqiang Zheng, Chuntai Liu*, Jingbo Chen, Changyu Shen, Tuning of vapor sensing behaviors of eco-
friendly conductive polymer composites utilizing ramie fiber, Sensors and Actuators B: Chemical, 2015,221:1279–1289(IF=4.097)
6. Linxiang Huang, Zhen Wang, Guoqiang Zheng*, John Zhanhu Guo, Kun Dai, Chuntai Liu *, Enhancing oriented crystals in injection-
molded HDPE through introduction of pre-shear, Materials and Design, 2015,78: 12–18 (IF=3.501)
7. Xiaohan Cao, Yan Lan, Yue Wei, Guoqiang Zheng, Kun Dai*, Chuntai Liu* , Changyu Shen, Tunable resistivity–temperature
characteristics of an electrically conductive multi-walled carbon nanotubes/epoxy composite, Materials Letters, 2015, 159(15): 276–279(IF=2.489)
8. Lu Bo;Zheng Guoqiang*;Dai Kun;Liu Chuntai*;Chen Jingbo,Shen, Changyu,Enhanced mechanical properties of polyethylene
composites with low content of electrospun nylon-66 nanofibers,Materials Letters,2015, 140: 131-134(IF=2.489)
9. Zhongzhu Liu, Xianhu Liu,Guoqiang Zheng*,Kun Dai,Chuntai Liu* ,Changyu Shen,New insight into lamellar branching of b-
nucleated isotactic polypropylene upon melt-stretching: WAXD and SAXS study,Journal of Materials Science, 2015,50(2):599-604(IF=2.305)
10. Yuezhan Feng, Bo Wang*, Yang Chen, Chuntai Liu*, Jingbo Chen, Changyu Shen, A facile strategy for functionalizing silica
nanoparticles by polycarbonate degradation and its application in polymer nanocomposites, Polymer Degradation and Stability, 2015, 119:295-298 (IF=3.163)
11. Yuezhan Feng, Bo Wang*, Fangfang Wang, Yuanxu Zhao, Chuntai Liu*, Jingbo Chen, Changyu Shen, Thermal degradation mechanism and
kinetics of polycarbonate/silica nanocomposites, Polymer Degradation and Stability, 2014,107 :129-138(IF=3.163)
12. Shasha Wu, BoWang, GuoqiangZheng*, Shuangyang Liu, KunDai, Chuntai Liu, ChangyuShen, Preparation and characterization of
macroscopically electrospun polyamide 66 nanofiber bundles, Materials Letters, 2014, 124:77-80(IF=2.489)
13. Zhi-xiang CUI , Jun-hui SI,Chun-tai LIU*, Chang-yu SHEN ,Flowing simulation of injection molded parts with micro-channel, Applied
Mathematics and Mechanics,2014, 35(3): 269–276
14. Yamin Pan, Suyu Shi, Wenzhong Xu, Guoqiang Zheng, Kun Dai, Chuntai Liu*, Jingbo Chen, Changyu Shen,Wide distribution of shish-
kebab structure and tensile property of micro-injection-molded isotactic polypropylene microparts: a comparative study with injection-molded macroparts ,Journal of Materials Science,2014,49:1041-1048(IF=2.371)
15. Ke Li, Kun Dai, Xiangbin Xu, Guoqiang Zheng, Chuntai Liu*, Jingbo Chen, Changyu Shen, Organic vapor sensing behaviors of carbon
black/poly (lactic acid) conductive biopolymer composite,Colloid and Polymer Science,2013, 291(12):2871-2878 (IF=1.865)
16. Kun Dai, Shuaiguo Zhao, Wei Zhai, Guoqiang Zheng, Chuntai Liu*, Jingbo Chen, Changyu Shen,Tuning of liquid sensing performance of
conductive carbon black(CB)/polypropylene (PP) composite utilizing a segregated structure, Composites: Part A,2013, 55:11-18(IF=3.071)
17. Shuangyang Liu, Yanyan Liang, Yabo Quan, Kun Dai, Guoqiang Zheng, Chuntai Liu*, Jingbo Chen,Changyu Shen,Electrospun isotactic
polypropylene fibers: Self-similar morphology and microstructure,Polymer,54 (2013) 3117-3123(IF=3.562)
18. Bingbing Sun, Yijing Qin ,Yahu Xu ,Yuanhui Sun ,Bo Wang ,Kun Dai ,Guoqiang Zheng ,Chuntai Liu*, Jingbo Chen,Study of
shear-induced interfacial crystallization,in polymer-based composite through in situ monitoring interfacial shear stress,Journal of Materials Science,2013, 48(15):5354-5360(IF=2.305)
19. Junhui Zhao, Kun Dai, Chenggang Liu, Guoqiang Zheng, Bo Wang, Chuntai Liu*, Jingbo Chen, Changyu Shen, A comparison between strain
sensing behaviors of carbon black/polypropylene and carbon nanotubes/polypropylene electrically conductive composites ,Composites: Part A 48 (2013) 129–136(IF=3.071)
20. Caiqiao Ji, Mancun Xie, Baobao Chang, Kun Dai, Bo Wang, Guoqiang Zheng , Chuntai Liu* , Changyu Shen,b-Crystal in injection
moulded poly(ethylene terephthalate) fibre/isotactic polypropylene composite,Composites: Part A,2013,:4 6:26-33(IF=3.071)
21. Yanyan Liang , Guoqiang Zheng, Shuangyang Liu, Kun Dai, Chuntai Liu*, Jingbo Chen ,Changyu Shen b-Crystal in the iPP melt
encapsulated by transcrystallinity and spherulites: effect of molecular weight, Journal of Materials Science, 2013, 48:2326–2333(IF=2.305
22. Baobao Chang, Mancun Xie, Kun Dai, Guoqiang Zheng, Shiwei Wang, Chuntai Liu*, Jingbo Chen, Changyu Shen,Pre-shear induced anomalous
distribution of b-form in injection molded iPP ,Polymer Testing 32 (2013) 545–552(IF=2.240)
23. Xianhu Liu, Changyan Zhang, Kun Dai, Guoqiang Zheng, Chuntai Liu* and Changyu Shen,Unexpected molecular weight dependence of shish
kebab in water-assisted injection molded HDPE,Polymer Advanced Technologies,2013, 24:270–272(IF=1.768)
24. Liang, Yanyan;Liu, Shuangyang;Dai, Kun;Wang, Bo;Shao, Chunguang;Zhang, Qinxing; Wang, Songjie; Zheng, Guoqiang;Liu, Chuntai*;Chen,
Jingbo;Shen, Changyu;Li, Qian;Peng, Xiangfang, Transcrystallization in nanofiber bundle/isotactic polypropylene composites: effect of matrix molecular weight,Colloid and Polymer Science, 2012,290(12):1157-1164(IF=1.865)
25. Guoqiang Zheng, Zhenhua Jia, Xianhu Liu, Xiaoli Zhang, Baochen Liu, Kun Dai, Xuejing Zheng, Chuntai Liu*, Jingbo Chen, Xiangfang
Peng, Qian Li, Changyu Shen, Enhanced orientation of the water-assisted injection molded iPP in the presence of nucleating agent. Polymer Engineering and Science, 2012,52(4): 725-732(IF=1.520)

Contact Information
Room 906, National Engineering Research Center for Advanced Polymer Processing Technology (NERC)
Wenhua Road, Zhengzhou, Henan Province, China, 450002
TEL: +86-371-63887969
FAX: +86-371-63887570
Email: ctliu@zzu.edu.cn



Copyright @2012-2019 National Engineering Research Center for Advanced Polymer Processing &  Key Laboratory about Materials Forming and Mold Technology of Education Ministry , Zhengzhou Uninversity,All Right Reserved.