1.Microstructural comparison of hot isostatically pressed Mo-10Nb alloys before and after hot rolling，Materials Characterization211 (2024): 113849
2.Microstructure evolution and property characteristics in hot-pressed Mo-W-Cu refractory functional alloys with varying tungsten content，International Journal of Refractory Metals and Hard Materials125 (2024): 106859
3.Influence of powder ball milling pretreatment on microstructure and properties of Mo-W-Cu refractory functional alloys sintered in a normal-pressure hydrogen atmosphere，Powder Technology438 (2024): 119625
4.Thermal Stability, Optical and Electrical Properties of Substoichiometric Molybdenum OxideQing, Yubin郑州大学MaterialsA级杨凯军
5.Achieving high strength and high ductility in submicron-MgO/AZ31 composites with an innovative honeycomb-like structureWang, Chengduo郑州大学Journal of Materials Research and TechnologyB级王成铎
6.Oxygen-induced brittle cracking and low steady stress in Mo10Nb alloy during hot deformationWang, Chengduo郑州大学International Journal of Refractory Metals and Hard MaterialsB级王成铎
7.Improved quality and inhibited aggregation of Ag-In alloy filmsChen, Shaohui郑州大学VacuumB级王成铎
8.First-principles investigation on the effects of alloying elements on Cu/Mo interfaceLi, Zhenzhou郑州大学Chemical Physics LettersC级王成铎
9.Precursor decomposition mechanism of In2O3 powder for oxide ceramic targetsSong, Hongming郑州大学Ceramics InternationalB级陈杰
10.Preparing EBCO superconducting targets with uniform phase structure by pressure slip castingLiu, Yang郑州大学Ceramics InternationalB级刘洋
11.Multiscale Simulation of Droplets In-flight Solidification Behavior During Spray FormingLiu, Mingxiang郑州大学Metallurgical and Materials Transactions B刘明翔
12.Microstructure and Precipitation of a Cu–Ni Alloyed Medium-Mn Duplex Low-Density Steel Prepared by Near-Rapid SolidificationLiu, Mingxiang郑州大学Steel Research International刘明翔
13.Microstructural evolution and phase composition of In2Ga2ZnO7 ceramic targets during sinteringQi Chao郑州大学Rare Metals陈杰
14.Low-oxygen, uniform, and dense Mo10Nb alloys obtained by combining in situ deoxygenation and mechanical alloyingZhang, Xinyuan郑州大学International Journal of Refractory Metals and Hard Materials王成铎
15.First-principles study on the effect of alloying elements on theEhrlich-Schwoebel barriers on Ag(111)Yin, Han郑州大学Chemical Physics Letters王成铎
16.Liquid-phase synthesis and luminescence properties of Gd,O,S:Pr,Cenanophosphors from a novel sulfur sourceWang, Rongyang郑州大学Optical Materials王成铎
17.Orientation-dependent Electrical and Optical Characteristics of non-epitaxial Al-doped ZnO thin filmsLi, Jinghui郑州大学Ceramics International刘苗
18.Active learning driven discovery of novel alloyed catalysts for selective ammonia oxidationYang, Jiaqiang郑州大学Chemical Engineering Journal杨家强
19.PA2PbBr4/MAPbBr3 Heterojunction X-Ray Detector with Enhanced Sensitivity and Excellent Self-Powered FunctionalityHe, Ningfang郑州大学Advanced Optical Materials张龙振
20.CsxWO3 films with excellent infrared shielding ability and high visible light transmittance prepared via magnetron sputteringHe,Xin郑州大学Ceramics International张龙振
21.Fabrication of perovskite vertical heterojunction and flexible single-crystal_arrays using droplet-evaporated crystallization methodZhang, LongZhen郑州大学Journal of Solid State Chemistry张龙振
22.Research on the Fabrication and X‐Ray Detection Performance of MAPbBr3‐Based 3D/2D HeterojunctionsZhang, LongZhen郑州大学physica status solidi (RRL)–Rapid Research Letters张龙振
