◆ 中原关键金属实验室先进靶材中心副主任

◆ 郑州大学副教授、硕士生导师

先进靶材及制备技术；金属高纯净熔炼及控制凝固/成形加工技术；粉末处理及烧结过程控制技术；高性能金属及金属复合材料。

◆1998-2002：郑州大学材料科学与工程专业，获工学学士学位

◆2002-2005：郑州大学材料加工工程专业，获工学硕士学位

◆2005-2010：北京科技大学材料加工工程专业，获工学博士学位

◆2010-2012：中国科学院电工研究所，博士后

◆2012-2015：日本国立物质材料研究机构，博士后

◆2015-至今：郑州大学，硕士生导师

◆H. Liu, T. Han, Q. Li, B. Sun, C.D. Wang*, Novel microstructures inducing an excellent combination of strength and elongation in in-situ MgO/AZ31, Compos. Struct., 2022, 293:115770. (IF5.4,一区)

◆K. Zhai, S. Chen, C. D. Wang*, Q. Li, B. Sun, J. He, Microstructure and properties of WC-CoCuFeNi composites fabricated by spark plasma sintering, Int. J. Refract. Met. Hard Mater., 2022, 105: 105808. (IF3.9,二区)

◆G. Sun, X. Wu, C.D. Wang*, Q. Li*, K. Yang, B. Sun, J. He, Contact deoxidization of fine Ti powder by liquid calcium, Adv. Powder Technol., 2022, 33: 103402. (IF4.8,二区)

◆H. Liu, C. Gu, K. Zhai, C.D. Wang*, Strengthening and toughening the FeNiCrMn medium entropy alloy by novel ultrafine precipitate networks, Vacuum, 2021, 184: 109995. (IF3.6,二区)

◆C.D. Wang, H. Qiu, Y. Kimura, T. Inoue, Morphology, crystallography, and crack paths of tempered lath martensite in a medium-carbon low-alloy steel, Mater. Sci. Eng. A, 2016, 669: 48-57. (IF5.2,一区)

◆S. Li, W. Cao, C.D. Wang*, H. Qiu, Band gap engineering of Ba₅Nb₄O₁₅for efficient water splitting under visible light, J. Alloy. Compd., 2015, 644: 757-762. (IF5.3,一区)

联系邮箱