Liu Deping

Prof.

Office Tel: 0086-371-67781235

Mobile：0086-13598002376

E-mail: ldp@zzu.edu.cn

Research Interests

Advanced Manufacturing System , Mechatronics System

Education

Ph.D., Xidian University, 2008

M.S., Xidian University, 1994

B.S., Shenyang University of Technology, 1989

Publications

1. Liu D P, Chen J J. Point Data Reduction Technique in Reverse Engineering, Journal of Xidian University, 2008, 35(2):120-124. (In Chinese)

2. Liu D P, Liu X Y and Chen J J. The parameters extraction of revolution surface in Reverse Engineering, Journal of plasticity engineering, 2008, 35(2):120-124. (In Chinese)

3. Liu D P, Liu X Y and Chen J J. Research on Feature Parameters Extraction in Reverse Engineering, Journal of University of Electronic Science and Technology of China, 2008, 37(04):138-142. (In Chinese)

5. Liu D P, Shangguan J L and Chen J J. A Study on Data Pre-processing in Reverse Engineering, Proceedings of the international conference on mechanical transmissions, 2006（9）,Chongqing, China.

6. Liu D P, Chen J J and Shangguan J L. A STUDY ON DATA REDUCTION IN REVERSE ENGINEERING, Proceedings of the international technology and innovation conference 2006-Advanced Manufacturing Technologies,2006（11）, Hangzhou, China.

7. Liu D P, Chen J J. Reconstruction of Surface from Measuring Points Clouds. Machine Tool & Hydraulics, 2006(3):32-34.

8. Li D J, Liu D P, Shangguan J L. A study on measured data filters in reverse engineering. Modern Manufacturing Engineering, 2006(3):92-94.

9. Liu D P, Chen J J, Lan S P. Application of surfacer in surface reconstruction. Machinery Design & Manufacture, 2006(9):125-127.

10. Liu D P, Chen J J and Li D J. Technology of Reverse Engineering on Part Design. Tool Engineering, 2006, 40(7):39-42

11. Liu D P, Liu W F and Chen J J. Reverse engineering-based CAD modeling of die for kino lamp glass bulb. Die & Mould Industry, 2006,32(11):13-16.

12. Li D J, Liu D P and Shangguan J L. study on scan-line data compression in surface reconstruction. Machinery Design & Manufacture, 2006(11):69-70.

13. Li G W, Liu D P. Tool path in NC machining punch block profile for glass bulb screen. Die & Mould Industry, 2007, 33(03):59-63.(In Chinese)

14. Shangguan J L, Liu D P, Liu X Y. Integration of reverse engineering with rapid prototype manufacturing. Machinery Design & Manufacture，2007.06:205-207.(In Chinese)

15. Liu D P, Hou B J and Liu W F. Application of Reverse Engineering on Mould Manufacturing. Machine Tool & Hydraulics, 2007, 35(07):124-126.

16. Liu X Y, Liu D P. The design and calculate of the key technology for traditional machine tools NC retrofit. Machinery Design & Manufacture, 2007.09:42-44.

17. Liu W F, Liu D P. Dynamics Analysis for Open-chain Manipulators Based on Screw Theory Kane Dynamic Equations. Machinery & Electronics, 2007.05:51-54.

18. Liu D P, Chen J J. Research on key technique of reverse engineering. Machinery, 2005, 43(6):25-28.

19. Liu D P, Chen J J. Survey on integration RE and RPM. Mining & Processing Equipment, 2005, 33(7):72-75.

20. Liu D P, Xing W K. Operation and maintenance of CNC, ISBN978-7-5349-3554-1. Henan science & technique press. 2007.02.

21. Liu D P, Liu W F. CAD/CAM, ISBN978-7-5025-9847-1, Chemical industry press. 2007.02.

22. Liu D P, Liu W F. Programming and application of CNC, ISBN978-7-5025-9614-9, Chemical industry press, 2007.08.

23. Liu W F, Liu D P. Computer numerical control, ISBN978-7-5025-9964-5, Chemical industry press, 2007.04

24. Liu W F, Liu D P. Design of mechatronics system, ISBN978-7-122-00290-7, Chemical industry press, 2007.06

Honors and Awards

Second prize of Henan province science and technology progress

Academic Technology Leader of Henan Education Department (2009)